DIGITAL RCD TESTER
The WCM-RCD unit is a very high quality instrument used by professionals to obtain accurate values of protection time whilst a selectable fault current is injected to the earth. RCD trip time can also be easily measured at the power outlet. It tests all conventional RCD safety switches in electrical installations and extension leads.
Stocked in Newcastle, Call to confirm QTYs
The WCM-RCD is a microprocessor based Residual Current Device Tester or an Earth Leakage Circuit Breaker Tester that meets today’s standards of safety and performance.
The WCM-RCD unit is a very high quality instrument used by professionals to obtain accurate values of protection time whilst a selectable fault current is injected to the earth. RCD trip time can also be easily measured at the power outlet.
It tests all conventional RCD safety switches in electrical installations and extension leads.
Features:
Digital voltage reading line to earth
Over temperature protection
Mains supply test
Auto power off
RCD time trip
RCD ramp current test 10, 30, 100, 300, 500 & 650mA
0 and 180 degree phase angle testing
Microprocessor controlled for highest accuracy & reliability
12 month warranty
12 months calibration certificate to Australian Standards valued @ $108.
Fully conforms AS/NZ 3760 : 2010 standards
Delayed function test
Display change to Red for failed test
Part: WCM_RCD
Related products
-
ETRP
ET RADIUS PLATES
Call for PriceRadius Plate to suit EZYTRAY
Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPHNominal length 2.0 metres.
Order fasteners separately for installation.
Approximate length required to make a 150 radius bend -
ETTXH
ET TEE BRACKET
Tee/Cross Bracket to suit EZYTRAY
The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH2x TX Brackets required to make a tee, and 4 required to make a cross.
Order fasteners separately for installation (per TX Bracket):
4x SBH
4x CNH -
N1SHBH
N1 Hanging Splice Plate Kit
NEMA 1 Hanging Splice Plate HDG
2x Splices required per length of cable ladder.
2 x HB0820H required (per splice plate, supplied)
M8 Splice Fixing HolesEzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
Meets Nema 1 Load Rating
N1SHBH -
N1SH
N1 Splice Plate Kit
NEMA 1 Cable Ladder Splice Plate KIT HDG (includes bolts)
2x Splices required per length of cable ladder.
2 x HB0820H required (per splice plate, supplied)EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
Stainless Steel to AS1449, AS1837
N1SH