N1 BEND

Related products

• 

  ETHD

  ET HOLD DOWN

  Call for Price

  Hold Down Bracket to suit EZYTRAY
  The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

• 

  ETS

  ET SPLICE PLATE

  Call for Price

  Splice Plate to suit EZYTRAY
  Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

  2x Splices per length of tray.

  Order fasteners separately for installation (per splice plate):
  2x SBH
  2x CNH

• 

  EMSZ

  EzyMesh Side Joiner

  EMS Side Joiner to suit Ezymesh (EMS)
  Manufactured from 2mm Pressed steel to AS1594.
  To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
  The published load results are based on uniformly loaded, simply supported span.

• 

  CNH

  Flange Nut HDG

  Both Items are ordered separately.
  Purpose made Counterbore Nuts ensure that full tension is achieved during installation.

• 

  N1ER...

  N1 EXTERNAL RISER

  Call for Price

  NEMA 1 Cable Ladder External Riser HDG

• 

  N1SHBH

  N1 Hanging Splice Plate Kit

  NEMA 1 Hanging Splice Plate HDG

  2x Splices required per length of cable ladder.
  2 x HB0820H required (per splice plate, supplied)
  M8 Splice Fixing Holes

  EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
  Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
  Meets Nema 1 Load Rating
  N1SHBH

• 

  N1HDUH

  N1 Hold Down Kit

  NEMA 1 Cable Ladder Hold Down Unit HDG (includes springnut & bolt)
  Supplied complete with hold down plate, spring nut and screw.
  Hold Down units are supplied with zinc plated fasteners as standard.
  N1HDUH

• 

  N1VSH

  N1 Vertical Splice Plate Kit

  NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)

  2x Vertical Splices required per length of cable ladder.
  2x HB0820H required (per splice plate, supplied)

  EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
  Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
  Stainless Steel to AS1449, AS1837
  N1VSH