109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

N1SH
Call for Price

N1 Splice Plate Kit

NEMA 1 Cable Ladder Splice Plate KIT HDG (includes bolts)

2x Splices required per length of cable ladder.
2 x HB0820H required (per splice plate, supplied)

EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
Stainless Steel to AS1449, AS1837
N1SH

  Category:   Order on:

  Stocked in Newcastle, Call to confirm QTYs

  

  Category:   Order on:

Related products

  • ETHD

    ET HOLD DOWN

    Call for Price

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETRP

    ET RADIUS PLATES

    Call for Price

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • ETRL

    ET RISER LINK

    Call for Price

    Riser Line to suit EZYTRAY
    Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH

    6x Riser Links required to perform a 90 degree set.

    Order fasteners separately for installation (per riser link):
    2x SBH
    2x CNH

  • ETTXH

    ET TEE BRACKET

    Tee/Cross Bracket to suit EZYTRAY
    The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH

    2x TX Brackets required to make a tee, and 4 required to make a cross.
    Order fasteners separately for installation (per TX Bracket):
    4x SBH
    4x CNH

  • EMSZ

    EzyMesh Side Joiner

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • CNH

    Flange Nut HDG

    Both Items are ordered separately.
    Purpose made Counterbore Nuts ensure that full tension is achieved during installation.

  • N1SHBH

    N1 Hanging Splice Plate Kit

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1HSH

    N1 Horizontal Splice Plate Kit

    NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

    2x Horizontal Splices per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    H1HSH

On Sale