PIT3 – GASKET

Related products

• 

  ETHD

  ET HOLD DOWN

  Select Options ETHD

  Hold Down Bracket to suit EZYTRAY
  The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

• 

  ETS

  ET SPLICE PLATE

  Select Options ETS

  Splice Plate to suit EZYTRAY
  Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

  2x Splices per length of tray.

  Order fasteners separately for installation (per splice plate):
  2x SBH
  2x CNH

• 

  ETTXH

  ET TEE BRACKET

  Call for price ETTXH

  Tee/Cross Bracket to suit EZYTRAY
  The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH

  2x TX Brackets required to make a tee, and 4 required to make a cross.
  Order fasteners separately for installation (per TX Bracket):
  4x SBH
  4x CNH

• 

  EMWBZ

  Ezymesh Wall Mount Bracket

  Call for price EMWBZ

  Wall Mount to suit EZYMESH (EMWB)
  Manufactured from 2mm Pressed steel to AS1594.
  To be used on mesh lengths up to 150mm in width. 1 x M8 fastener supplied.

• 

  N1SH10BH

  N1 Hanging Splice Plate Kit

  Call for price N1SH10BH

  NEMA 1 Hanging Splice Plate HDG

  2x Splices required per length of cable ladder.
  2 x HB0820H required (per splice plate, supplied)
  M8 Splice Fixing Holes

  EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
  Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
  Meets Nema 1 Load Rating
  N1SHBH

• 

  N1L...

  NEMA 1 (12B)

  Select Options N1L...

  Nema 1 (12B) Cable Ladder

• 

  PIT3_LID_COMMS

  PIT3 – Concrete Lid Communications (Class A)

  Call for price PIT3_LID_COMMS

  PIT3 Concrete Lid – COMMS (Class A)

• 

  PIT3_LID_STEEL

  PIT3 – Steel Lid (Class B)

  Call for price PIT3_LID_STEEL

  PIT3 Steel Lid – BLANK (Class B)