109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

CNH
Call for Price

Flange Nut HDG

Both Items are ordered separately.
Purpose made Counterbore Nuts ensure that full tension is achieved during installation.

  Category:   Order on:

  Stocked in Newcastle, Call to confirm QTYs

  

  Category:   Order on:

Related products

  • CFCT...

    CT & ET Flat Cover

    Call for Price

    Flat Cover to suit Perforated (CT) and Ezytray (ET)

  • ETHD

    ET HOLD DOWN

    Call for Price

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETS

    ET SPLICE PLATE

    Call for Price

    Splice Plate to suit EZYTRAY
    Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

    2x Splices per length of tray.

    Order fasteners separately for installation (per splice plate):
    2x SBH
    2x CNH

  • EMSBZ

    EzyMesh Bolt Joiner

    Bolt Joiner Kit to suit EZYMESH (EMSB)
    The EzyMesh Bolt Joiner Kit is manufactured from pressed steel, and supplied with fastener for assembly.

  • EMSZ

    EzyMesh Side Joiner

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • N1SHBH

    N1 Hanging Splice Plate Kit

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1HDUH

    N1 Hold Down Kit

    NEMA 1 Cable Ladder Hold Down Unit HDG (includes springnut & bolt)
    Supplied complete with hold down plate, spring nut and screw.
    Hold Down units are supplied with zinc plated fasteners as standard.
    N1HDUH

  • N2B...

    N2 BEND

    Call for Price

    NEMA 2 Cable Ladder Bend HDG

On Sale