Angle Plate Fitting (3x 14mm Holes) HDG
Call for price or Log in
Angle Plate Fitting (3x 14mm Holes) HDG
Related products
-
E1325H
-
E1033H
-
ETHD
ET HOLD DOWN
Select OptionsHold Down Bracket to suit EZYTRAY
The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH -
ETS
ET SPLICE PLATE
Select OptionsSplice Plate to suit EZYTRAY
Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH2x Splices per length of tray.
Order fasteners separately for installation (per splice plate):
2x SBH
2x CNH -
ETTXH
ET TEE BRACKET
Call for priceTee/Cross Bracket to suit EZYTRAY
The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH2x TX Brackets required to make a tee, and 4 required to make a cross.
Order fasteners separately for installation (per TX Bracket):
4x SBH
4x CNH -
N1SH10BH
N1 Hanging Splice Plate Kit
Call for priceNEMA 1 Hanging Splice Plate HDG
2x Splices required per length of cable ladder.
2 x HB0820H required (per splice plate, supplied)
M8 Splice Fixing HolesEzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
Meets Nema 1 Load Rating
N1SHBH -
N1VSH
N1 Vertical Splice Plate Kit
Call for priceNEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)
2x Vertical Splices required per length of cable ladder.
2x HB0820H required (per splice plate, supplied)EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
Stainless Steel to AS1449, AS1837
N1VSH -
N1L...
