Tag: Ross Joice Agencies
Ross Joice Agencies
Showing 145–168 of 491 results
-
Cover PVC Suit Strut x 3m Long
Call for price E1184PEzyStrut provides a range of plastic accessories to complement 41mm wide channel sections.
Channel can be transformed into cable conduits using the channel cover strip and range of end caps.
Sold in 3 metre lengths. E1184P -
-
Cup Head Bolt
Call for price SBHBoth Items are ordered separately.
EzyStrut Splice Bolts have a smooth head to eliminate the risk of sheathing the cable during installation. -
-
DIGITAL RCD TESTER
Call for price WCM_RCDThe WCM-RCD unit is a very high quality instrument used by professionals to obtain accurate values of protection time whilst a selectable fault current is injected to the earth. RCD trip time can also be easily measured at the power outlet. It tests all conventional RCD safety switches in electrical installations and extension leads.
-
-
-
-
-
-
-
-
-
ET HOLD DOWN
Select Options ETHDHold Down Bracket to suit EZYTRAY
The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH -
ET RADIUS PLATES
Select Options ETRPRadius Plate to suit EZYTRAY
Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPHNominal length 2.0 metres.
Order fasteners separately for installation.
Approximate length required to make a 150 radius bend -
ET RISER LINK
Select Options ETRLRiser Line to suit EZYTRAY
Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH6x Riser Links required to perform a 90 degree set.
Order fasteners separately for installation (per riser link):
2x SBH
2x CNH -
ET SPLICE PLATE
Select Options ETSSplice Plate to suit EZYTRAY
Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH2x Splices per length of tray.
Order fasteners separately for installation (per splice plate):
2x SBH
2x CNH -
ET TEE BRACKET
Call for price ETTXHTee/Cross Bracket to suit EZYTRAY
The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH2x TX Brackets required to make a tee, and 4 required to make a cross.
Order fasteners separately for installation (per TX Bracket):
4x SBH
4x CNH -
-
-
EzyMesh Bolt Joiner
Call for price EMSBZBolt Joiner Kit to suit EZYMESH (EMSB)
The EzyMesh Bolt Joiner Kit is manufactured from pressed steel, and supplied with fastener for assembly. -
Ezymesh Bottom Joiner
Call for price EMSCZBottom Joiner to suit EZYMESH (EMSC)
Manufactured from 2mm Pressed steel to AS1594.
The published load results are based on uniformly loaded, simply supported span.
To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only. -
EzyMesh Side Joiner
Call for price EMSZEMS Side Joiner to suit Ezymesh (EMS)
Manufactured from 2mm Pressed steel to AS1594.
To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
The published load results are based on uniformly loaded, simply supported span. -
Ezymesh Wall Mount Bracket
Call for price EMWBZWall Mount to suit EZYMESH (EMWB)
Manufactured from 2mm Pressed steel to AS1594.
To be used on mesh lengths up to 150mm in width. 1 x M8 fastener supplied.