109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Ezymesh Wall Mount Bracket

Call for Price

Wall Mount to suit EZYMESH (EMWB)
Manufactured from 2mm Pressed steel to AS1594.
To be used on mesh lengths up to 150mm in width. 1 x M8 fastener supplied.

Part: EMWBZ Category: Order on:

Stocked: On Request, Call to confirm QTYs

Enquire for Pricing
Part: EMWBZ Category: Order on:

Related products

  • ETHD

    ET HOLD DOWN

    Call for Price

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETTXH

    ET TEE BRACKET

    Tee/Cross Bracket to suit EZYTRAY
    The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH

    2x TX Brackets required to make a tee, and 4 required to make a cross.
    Order fasteners separately for installation (per TX Bracket):
    4x SBH
    4x CNH

  • EMSZ

    EzyMesh Side Joiner

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • CNH

    Flange Nut HDG

    Both Items are ordered separately.
    Purpose made Counterbore Nuts ensure that full tension is achieved during installation.

  • N1CCH

    N1 Cover Clamp

    NEMA 1 Cable Ladder Cover Clamp HDG (includes bolt)
    Supplied complete with cone screw for installation.
    Suitable for use on both cable ladders and fittings.
    N1CCH

  • N1SHBH

    N1 Hanging Splice Plate Kit

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1HSH

    N1 Horizontal Splice Plate Kit

    NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

    2x Horizontal Splices per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    H1HSH

  • N1L...

    NEMA 1 (12B)

    Call for Price

    Nema 1 (12B) Ladder Tray

On Sale

Quote List

No products in the list