109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Call for price

EXTERNAL CORNER – 150 x 35

External Corner to suit AKS35

Download: DATASHEET
SKU: AKS35EC... Category: Tag:   Free into Store over $150
AKS35-XX 150 50 3000 1x 3m Duct Body + 1x 3m Snap-Fit Lid + 1x Joiner Kit
AKS35OC-XX Outlet Mounting Kit to suit AKS35
AKS35E-XX End Cap to suit AKS35
AKS35EC-XX External Corner to suit AKS35
AKS35IC-XX Internal Corner to suit AKS35
AKS35FP-XX EXTRA – Outlet Front Plate ONLY to suit AKS35
AKS35SO-XX EXTRA – Outlet Mounting Shroud & screws ONLY to suit AKS35
AKS35L-XX EXTRA – 1x 3m Snap-Fit Lid ONLY to suit AKS50
AKS35D-XX EXTRA – 1x 3m Duct Body ONLY to suit AKS50
Colour

Black Ripple, Natural Anodised, Oyster Grey, Pearl White, Rivergum Biege
SKU: AKS35EC... Category: Tag:   Free into Store over $150

Related products

  • ETHD

    ET HOLD DOWN

    Select Options

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETS

    ET SPLICE PLATE

    Select Options

    Splice Plate to suit EZYTRAY
    Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

    2x Splices per length of tray.

    Order fasteners separately for installation (per splice plate):
    2x SBH
    2x CNH

  • EMSCZ

    Ezymesh Bottom Joiner

    Call for price

    Bottom Joiner to suit EZYMESH (EMSC)
    Manufactured from 2mm Pressed steel to AS1594.
    The published load results are based on uniformly loaded, simply supported span.
    To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.

  • EMWBZ

    Ezymesh Wall Mount Bracket

    Call for price

    Wall Mount to suit EZYMESH (EMWB)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used on mesh lengths up to 150mm in width. 1 x M8 fastener supplied.

  • AKS35IC...

    INTERNAL CORNER – 150 x 35

    Call for price

    Internal Corner to suit AKS35

  • N1B...

    N1 BEND

    Select Options

    NEMA 1 Cable Ladder Bend HDG (includes bolts)

  • N1HSH

    N1 Horizontal Splice Plate Kit

    Call for price

    NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

    2x Horizontal Splices per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    H1HSH

  • N1L...

    NEMA 1 (12B)

    Select Options

    Nema 1 (12B) Cable Ladder