109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
CONTACT US 02 4961 4433
Wishlist
CONTACT US 02 4961 4433

ZIPPERTUBE HEATSHRINK

Select Options

SKU:

RJAN Zippertube Heatshrink, also known as Wraparound Cable Repair Sleeves is available in both 500mm and 1000mm lengths

Zipper Tube Heatshrink Part Numbers:
RMS43-10/500 – 43mm – 10mm Zipper Tube
RMS52-15/500 – 52mm – 15mm Zipper Tube
RMS52-15/1000 – 52mm – 15mm Zipper Tube
RMS76-22/500 – 76mm – 22mm Zipper Tube
RMS76-22/1000 – 76mm – 22mm Zipper Tube
RMS100-30/1000 – 100mm – 30mm Zipper Tube
RMS139-38/1000 – 139mm – 38mm Zipper Tube
RMS185-55/1000 – 185mm – 55mm Zipper Tube

Range

100mm – 30mm, 139mm – 38mm, 185mm – 55mm, 52mm – 15mm, 76mm – 22mm
Length

500mm, 1000mm
PART#: N/A Category: Order on:   Free into Store over $150

Related products

  • ET RADIUS PLATES

     Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • EzyMesh Bolt Joiner

     Call for price EMSBZ

    Bolt Joiner Kit to suit EZYMESH (EMSB)
    The EzyMesh Bolt Joiner Kit is manufactured from pressed steel, and supplied with fastener for assembly.

  • HEATSHRINK – GLUE LINED (4ft)

     Select Option HSMDW...

    Heatshrink Medium Wall Glue Lined (4ft) medium wall heat shrink tubing with a shrink ratio of 4:1 is resistant to solvents, acids and alkaline solutions and offers especially good mechanical strength. The thermoplastic adhesive liner provides good moisture sealing and weathering protection. Suitable for insulation and protection of low voltage cable joints and terminations.

  • HEATSHRINK – THIN WALL

     Call for price HSTW...

    Heatshrink Thin Wall Coloured (Rolls)

  • N1 Hold Down Kit

     Call for price N1HDUH

    NEMA 1 Cable Ladder Hold Down Unit HDG (includes springnut & bolt)
    Supplied complete with hold down plate, spring nut and screw.
    Hold Down units are supplied with zinc plated fasteners as standard.
    N1HDUH

  • N1 Splice Plate Kit

     Call for price N1SH

    NEMA 1 Cable Ladder Splice Plate KIT HDG (includes bolts)

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1SH

  • N1 Vertical Splice Plate Kit

     Call for price N1VSH

    NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)

    2x Vertical Splices required per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1VSH

  • Perforated Cable Tray

     Select Options CT...

    CT Perforated Cable Tray