109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

MA47...
Call for Price

HEATSHRINK – GLUE LINED (4ft)

Heatshrink Medium Wall Glue Lined (4ft) medium wall heat shrink tubing with a shrink ratio of 4:1 is resistant to solvents, acids and alkaline solutions and offers especially good mechanical strength. The thermoplastic adhesive liner provides good moisture sealing and weathering protection. Suitable for insulation and protection of low voltage cable joints and terminations.

Download: DATASHEET
  Category:   Order on:
Clear
  

Glue Lined Heatshrink Part Numbers:
MA47-12/3-BK Heatshrink Medium Wall Glue Lined 12mm – 3mm BLACK (4ft) MA47-12/BK
MA47-22/6-BK Heatshrink Medium Wall Glue Lined 22mm – 6mm BLACK (4ft) MA47-19/BK
MA47-30/8-BK Heatshrink Medium Wall Glue Lined 34mm – 8mm BLACK (4ft) MA47-30/BK
MA47-40/12-BK Heatshrink Medium Wall Glue Lined 44mm – 12mm BLACK (4ft) MA47-40/BK
MA47-55/16-BK Heatshrink Medium Wall Glue Lined 56mm – 16mm BLACK (4ft) MA47-50/BK
MA47-65/19-BK Heatshrink Medium Wall Glue Lined 63mm – 19mm BLACK (4ft) MA47-63/BK
MA47-75/22-BK Heatshrink Medium Wall Glue Lined 75mm – 22mm BLACK (4ft) MA47-75/BK
MA47-95/30-BK Heatshrink Medium Wall Glue Lined 95mm – 30mm BLACK (4ft) MA47-95/BK
MA47-115/34-BK Heatshrink Medium Wall Glue Lined 115mm – 34mm BLACK (4ft) MA47-115/BK

Range

115mm – 34mm, 12mm – 3mm, 140mm – 42mm, 22mm – 6mm, 34mm – 8mm, 40mm – 12mm, 55mm – 16mm, 65mm – 19mm, 75mm – 22mm, 95mm – 30mm
  Category:   Order on:

Related products

  • ETRP

    ET RADIUS PLATES

    Call for Price

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • EMSCZ

    Ezymesh Bottom Joiner

    Bottom Joiner to suit EZYMESH (EMSC)
    Manufactured from 2mm Pressed steel to AS1594.
    The published load results are based on uniformly loaded, simply supported span.
    To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.

  • ET...

    EZYTRAY

    Call for Price

    EZYTRAY Cable Tray

  • HEATSHRINK – THIN WALL

    Call for Price

    Heatshrink Thin Wall Coloured (Rolls)

  • N1B...

    N1 BEND

    Call for Price

    NEMA 1 Cable Ladder Bend HDG (includes bolts)

  • N1SHBH

    N1 Hanging Splice Plate Kit

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1HDUH

    N1 Hold Down Kit

    NEMA 1 Cable Ladder Hold Down Unit HDG (includes springnut & bolt)
    Supplied complete with hold down plate, spring nut and screw.
    Hold Down units are supplied with zinc plated fasteners as standard.
    N1HDUH

  • N1SH

    N1 Splice Plate Kit

    NEMA 1 Cable Ladder Splice Plate KIT HDG (includes bolts)

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1SH

On Sale