109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
CONTACT US 02 4961 4433
Wishlist
CONTACT US 02 4961 4433

SPRING WASHERS

Select Options

SKU: WS...

Spring Washers

  Stocked in Newcastle, Call to confirm QTYs

Part: WS10Z, WS06H, WS08H, WS10H, WS12H, WS06S, WS08S, WS10S, WS12S

Hole Size

06mm, 08mm, 10mm, 12mm
Finish

HDG, Stainless Steel, ZINC
PART#: WS... Category: Order on:   +Freight Charge

Related products

  • ET HOLD DOWN

     Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ET SPLICE PLATE

     Select Options ETS

    Splice Plate to suit EZYTRAY
    Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

    2x Splices per length of tray.

    Order fasteners separately for installation (per splice plate):
    2x SBH
    2x CNH

  • EzyMesh Side Joiner

     Call for price EMSZ

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • N1 BEND

     Select Options N1B...

    NEMA 1 Cable Ladder Bend HDG (includes bolts)

  • N1 EXTERNAL RISER

     Select Options N1ER...

    NEMA 1 Cable Ladder External Riser HDG

  • N1 Hanging Splice Plate Kit

     Call for price N1SH10BH

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1 Splice Plate Kit

     Call for price N1SH

    NEMA 1 Cable Ladder Splice Plate KIT HDG (includes bolts)

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1SH

  • SPRING NUTS

     Select Options E....

    Channel Spring Nuts