PIT4_GASKET

Related products

• 

  ETHD

  ET HOLD DOWN

  Select Options ETHD

  Hold Down Bracket to suit EZYTRAY
  The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

• 

  ETS

  ET SPLICE PLATE

  Select Options ETS

  Splice Plate to suit EZYTRAY
  Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

  2x Splices per length of tray.

  Order fasteners separately for installation (per splice plate):
  2x SBH
  2x CNH

• 

  EMSCZ

  Ezymesh Bottom Joiner

  Call for price EMSCZ

  Bottom Joiner to suit EZYMESH (EMSC)
  Manufactured from 2mm Pressed steel to AS1594.
  The published load results are based on uniformly loaded, simply supported span.
  To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.

• 

  EMSZ

  EzyMesh Side Joiner

  Call for price EMSZ

  EMS Side Joiner to suit Ezymesh (EMS)
  Manufactured from 2mm Pressed steel to AS1594.
  To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
  The published load results are based on uniformly loaded, simply supported span.

• 

  ET...

  EZYTRAY

  Select Options ET...

  EZYTRAY Cable Tray

• 

  N1SH

  N1 Splice Plate Kit

  Call for price N1SH

  NEMA 1 Cable Ladder Splice Plate KIT HDG (includes bolts)

  2x Splices required per length of cable ladder.
  2 x HB0820H required (per splice plate, supplied)

  EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
  Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
  Stainless Steel to AS1449, AS1837
  N1SH

• 

  N1L...

  NEMA 1 (12B)

  Select Options N1L...

  Nema 1 (12B) Cable Ladder

• 

  PIT4_LID_COMMS

  PIT4 – Concrete Lid Communications (Class A)

  Call for price PIT4_LID_COMMS

  PIT4 Concrete Lid – COMMS (Class A)