109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

N2HSH
Call for Price

N2 Horizontal Splice Plate

NEMA 2 Cable Ladder Horizontal Splice Plate HDG (N2HSH)

2x Splices required per length of cable ladder.
4x SBH required per splice plate
4x SNH required per splice plate

EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
Stainless Steel to AS1449, AS1837

  Category:   Order on:

  Stocked in Newcastle, Call to confirm QTYs

  

  Category:   Order on:

Related products

  • CFCT...

    CT & ET Flat Cover

    Call for Price

    Flat Cover to suit Perforated (CT) and Ezytray (ET)

  • ETHD

    ET HOLD DOWN

    Call for Price

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETRL

    ET RISER LINK

    Call for Price

    Riser Line to suit EZYTRAY
    Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH

    6x Riser Links required to perform a 90 degree set.

    Order fasteners separately for installation (per riser link):
    2x SBH
    2x CNH

  • EMSCZ

    Ezymesh Bottom Joiner

    Bottom Joiner to suit EZYMESH (EMSC)
    Manufactured from 2mm Pressed steel to AS1594.
    The published load results are based on uniformly loaded, simply supported span.
    To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.

  • CNH

    Flange Nut HDG

    Both Items are ordered separately.
    Purpose made Counterbore Nuts ensure that full tension is achieved during installation.

  • N2B...

    N2 BEND

    Call for Price

    NEMA 2 Cable Ladder Bend HDG

  • N2CCH

    N2 Cover Clamp

    NEMA 2 Cable Ladder Cover Clamp HDG (N2CCH)

    Supplied complete with cone screw for installation.

  • N2VSH

    N2 Vertical Splice Plate

    NEMA 2 Cable Ladder Vertical Splice Plate HDG (N2VSH)

    2x Splices required per length of cable ladder.
    4x SBH required per splice plate
    4x SNH required per splice plate

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:

    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837

On Sale