109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Call for price

Angle Strut Fitting (4x 14mm Holes) HDG

Angle Strut Fitting (4x 14mm Holes) HDG

SKU: E1325H Category: Tag:   Free into Store over $150
SKU: E1325H

Part: E1325H

SKU: E1325H Category: Tag:   Free into Store over $150

Related products

  • CFCT...

    CT & ET Flat Cover

    Select Options CFCT...

    Flat Cover to suit Perforated (CT) and Ezytray (ET)

  • ETHD

    ET HOLD DOWN

    Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETRP

    ET RADIUS PLATES

    Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • EMSZ

    EzyMesh Side Joiner

    Call for price EMSZ

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • EMWBZ

    Ezymesh Wall Mount Bracket

    Call for price EMWBZ

    Wall Mount to suit EZYMESH (EMWB)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used on mesh lengths up to 150mm in width. 1 x M8 fastener supplied.

  • ET...

    EZYTRAY

    Select Options ET...

    EZYTRAY Cable Tray

  • N1HSH

    N1 Horizontal Splice Plate Kit

    Call for price N1HSH

    NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

    2x Horizontal Splices per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    H1HSH

  • N1IR...

    N1 INTERNAL RISER

    Select Options N1IR...

    NEMA 1 Cable Ladder Internal Riser HDG