Angle Plate Fitting (4x 14mm Holes) HDG
Call for price or Log in
Angle Plate Fitting (4x 14mm Holes) HDG
Call for price or Log in
Angle Plate Fitting (4x 14mm Holes) HDG
Part: E1359H
Hold Down Bracket to suit EZYTRAY
The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH
Riser Line to suit EZYTRAY
Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH
6x Riser Links required to perform a 90 degree set.
Order fasteners separately for installation (per riser link):
2x SBH
2x CNH
Splice Plate to suit EZYTRAY
Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH
2x Splices per length of tray.
Order fasteners separately for installation (per splice plate):
2x SBH
2x CNH
Bolt Joiner Kit to suit EZYMESH (EMSB)
The EzyMesh Bolt Joiner Kit is manufactured from pressed steel, and supplied with fastener for assembly.