Flat Plate Fitting (2x 14mm Holes) HDG
Call for price
SKU: E1065HFlat Plate Fitting (2x 14mm Holes) HDG
Call for price
SKU: E1065HFlat Plate Fitting (2x 14mm Holes) HDG
Par: E1065H
Hold Down Bracket to suit EZYTRAY
The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH
EzyStrut Cable Mesh provides premium performance in commercial and light industrial applications.
Bottom Joiner to suit EZYMESH (EMSC)
Manufactured from 2mm Pressed steel to AS1594.
The published load results are based on uniformly loaded, simply supported span.
To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.
EMS Side Joiner to suit Ezymesh (EMS)
Manufactured from 2mm Pressed steel to AS1594.
To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
The published load results are based on uniformly loaded, simply supported span.
NEMA 1 Hanging Splice Plate HDG
2x Splices required per length of cable ladder.
2 x HB0820H required (per splice plate, supplied)
M8 Splice Fixing Holes
EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
Meets Nema 1 Load Rating
N1SHBH