Call for price or Log in
Flat Plate Fitting (1x 12mm Hole) HDG
Part: E1064H
Hold Down Bracket to suit EZYTRAY
The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH
Splice Plate to suit EZYTRAY
Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH
2x Splices per length of tray.
Order fasteners separately for installation (per splice plate):
2x SBH
2x CNH
Tee/Cross Bracket to suit EZYTRAY
The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH
2x TX Brackets required to make a tee, and 4 required to make a cross.
Order fasteners separately for installation (per TX Bracket):
4x SBH
4x CNH
EMS Side Joiner to suit Ezymesh (EMS)
Manufactured from 2mm Pressed steel to AS1594.
To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
The published load results are based on uniformly loaded, simply supported span.
NEMA 1 Hanging Splice Plate HDG
2x Splices required per length of cable ladder.
2 x HB0820H required (per splice plate, supplied)
M8 Splice Fixing Holes
EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
Meets Nema 1 Load Rating
N1SHBH