109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
CONTACT US 02 4961 4433
Wishlist
CONTACT US 02 4961 4433

41mm x 41mm x 6m Channel/Strut Stainless Steel SS316

Call for price

SKU: E1000S

Channel/Strut 41mm x 41mm x 6000mm Stainless Steel SS316

Download: DATASHEET

EzyStrut E1000S Channel/Strut section is manufactured from strip steel to the following AS standards:

Mild Steel & Hot Dip Galvanised to AS/NZS1365, AS1594, AS/NZS4680, ISO1461
Pre-Galvanised to AS1397
Stainless Steel to AS1449, AS2837

Technical Details
The load values shown are in accordance with AS/NZS4600:1996, using a minimum yield stress for Fy of 210 MPa on plain channel/strut.

The published results are based on a uniformly loaded, simply supported span.

Deflection has been calculated using standard formulae at the maximum permissible stress.

PART#: E1000S Category: Order on:   Pick Up ONLY

Related products

  • 41mm x 41mm x 6m Channel/Strut SLOTTED HDG

     Call for price E1000SH

    Channel/Strut SLOTTED 41mm x 41mm x 6000mm HDG

  • Cover PVC Suit Strut x 3m Long

     Call for price E1184P

    EzyStrut provides a range of plastic accessories to complement 41mm wide channel sections.
    Channel can be transformed into cable conduits using the channel cover strip and range of end caps.
    Sold in 3 metre lengths. E1184P

  • ET HOLD DOWN

     Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ET RADIUS PLATES

     Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • ET SPLICE PLATE

     Select Options ETS

    Splice Plate to suit EZYTRAY
    Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

    2x Splices per length of tray.

    Order fasteners separately for installation (per splice plate):
    2x SBH
    2x CNH

  • EZYTRAY

     Select Options ET...

    EZYTRAY Cable Tray

  • Perforated Cable Tray

     Select Options CT...

    CT Perforated Cable Tray

  • PVC End Cap suit E1000

     Call for price E1180P

    EzyStrut provides a range of plastic accessories to complement 41mm wide channel sections.
    Channel can be transformed into cable conduits using the channel cover strip and range of end caps.
    Suits 41x41mm channel.