109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Call for price

OUTLET KIT – 150 x 50

Outlet Mounting Kit to suit AKS50

Download: DATASHEET
SKU: AKS50OC... Category: Tag:   Free into Store over $150
SKU: AKS50OC...
AKS50-XX 150 50 3000 1x 3m Duct Body + 1x 3m Snap-Fit Lid + 1x Joiner Kit
AKS50OC-XX Outlet Mounting Kit to suit AKS50
AKS50E-XX End Cap to suit AKS50
AKS50EC-XX External Corner to suit AKS50
AKS50IC-XX Internal Corner to suit AKS50
AKS50FP-XX EXTRA – Outlet Front Plate ONLY to suit AKS50
AKS50SO-XX EXTRA – Outlet Mounting Shroud & screws ONLY to suit AKS50
AKS50L-XX EXTRA – 1x 3m Snap-Fit Lid ONLY to suit AKS50
AKS50D-XX EXTRA – 1x 3m Duct Body ONLY to suit AKS50
Colour

Black Ripple, Natural Anodised, Oyster Grey, Pearl White, Rivergum Biege
SKU: AKS50OC... Category: Tag:   Free into Store over $150

Related products

  • ETHD

    ET HOLD DOWN

    Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETRP

    ET RADIUS PLATES

    Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • ETRL

    ET RISER LINK

    Select Options ETRL

    Riser Line to suit EZYTRAY
    Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH

    6x Riser Links required to perform a 90 degree set.

    Order fasteners separately for installation (per riser link):
    2x SBH
    2x CNH

  • ETS

    ET SPLICE PLATE

    Select Options ETS

    Splice Plate to suit EZYTRAY
    Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

    2x Splices per length of tray.

    Order fasteners separately for installation (per splice plate):
    2x SBH
    2x CNH

  • ETTXH

    ET TEE BRACKET

    Call for price ETTXH

    Tee/Cross Bracket to suit EZYTRAY
    The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH

    2x TX Brackets required to make a tee, and 4 required to make a cross.
    Order fasteners separately for installation (per TX Bracket):
    4x SBH
    4x CNH

  • EMSZ

    EzyMesh Side Joiner

    Call for price EMSZ

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • N1B...

    N1 BEND

    Select Options N1B...

    NEMA 1 Cable Ladder Bend HDG (includes bolts)

  • N1HSH

    N1 Horizontal Splice Plate Kit

    Call for price N1HSH

    NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

    2x Horizontal Splices per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    H1HSH