109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Call for price

RHINOCAST LIFTING KEY (LONG)

Gatic Lid Lifter (Pair) – 84854

SKU: 84854 Category: Tag:   +Freight Charge
SKU: 84854
SKU: 84854 Category: Tag:   +Freight Charge

Related products

  • ETHD

    ET HOLD DOWN

    Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETS

    ET SPLICE PLATE

    Select Options ETS

    Splice Plate to suit EZYTRAY
    Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

    2x Splices per length of tray.

    Order fasteners separately for installation (per splice plate):
    2x SBH
    2x CNH

  • EMSZ

    EzyMesh Side Joiner

    Call for price EMSZ

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • CNH

    Flange Nut HDG

    Call for price CNH

    Both Items are ordered separately.
    Purpose made Counterbore Nuts ensure that full tension is achieved during installation.

  • N1ER...

    N1 EXTERNAL RISER

    Select Options N1ER...

    NEMA 1 Cable Ladder External Riser HDG

  • N1SH10BH

    N1 Hanging Splice Plate Kit

    Call for price N1SH10BH

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1IR...

    N1 INTERNAL RISER

    Select Options N1IR...

    NEMA 1 Cable Ladder Internal Riser HDG

  • N1VSH

    N1 Vertical Splice Plate Kit

    Call for price N1VSH

    NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)

    2x Vertical Splices required per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1VSH