Plastic Earth Rod Pit

Related products

• ETHD
  

  ET HOLD DOWN

  Select Options

  Hold Down Bracket to suit EZYTRAY
  The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

• ETRP
  

  ET RADIUS PLATES

  Select Options

  Radius Plate to suit EZYTRAY
  Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

  Nominal length 2.0 metres.
  Order fasteners separately for installation.
  Approximate length required to make a 150 radius bend

• EMSZ
  

  EzyMesh Side Joiner

  Call for price

  EMS Side Joiner to suit Ezymesh (EMS)
  Manufactured from 2mm Pressed steel to AS1594.
  To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
  The published load results are based on uniformly loaded, simply supported span.

• EMWBZ
  

  Ezymesh Wall Mount Bracket

  Call for price

  Wall Mount to suit EZYMESH (EMWB)
  Manufactured from 2mm Pressed steel to AS1594.
  To be used on mesh lengths up to 150mm in width. 1 x M8 fastener supplied.

• MEB1
  

  Metal Earth Rod Pit

  Call for price

  Earth Rod Pit Metal c/w Hinged Lid
  155mm x 130mm x 75mm

• CFN1...
  

  N1 COVER

  Select Options

  EzyStrut covers are manufactured from sheet steel to the following AS standards: Pre-Galvanised to AS1397 Hot Dip Galvanised to AS/NZS4680, ISO1461 Stainless Steel to AS1449, AS2837 Aluminium to AS1734 Part: CFN1600H, CFN1300H, CFN1150H, CFN1450H

• N1SH10BH
  

  N1 Hanging Splice Plate Kit

  Call for price

  NEMA 1 Hanging Splice Plate HDG

  2x Splices required per length of cable ladder.
  2 x HB0820H required (per splice plate, supplied)
  M8 Splice Fixing Holes

  EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
  Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
  Meets Nema 1 Load Rating
  N1SHBH

• N1HSH
  

  N1 Horizontal Splice Plate Kit

  Call for price

  NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

  2x Horizontal Splices per length of cable ladder.
  2x HB0820H required (per splice plate, supplied)

  EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
  Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
  Stainless Steel to AS1449, AS1837
  H1HSH