109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Call for price

ET TEE BRACKET

Tee/Cross Bracket to suit EZYTRAY
The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH

2x TX Brackets required to make a tee, and 4 required to make a cross.
Order fasteners separately for installation (per TX Bracket):
4x SBH
4x CNH

Download: DATASHEET
SKU: ETTXH Category: Tag:   Free into Store over $150
SKU: ETTXH
SKU: ETTXH Category: Tag:   Free into Store over $150

Related products

  • SBH

    Cup Head Bolt

    Call for price SBH

    Both Items are ordered separately.
    EzyStrut Splice Bolts have a smooth head to eliminate the risk of sheathing the cable during installation.

  • ETHD

    ET HOLD DOWN

    Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETRL

    ET RISER LINK

    Select Options ETRL

    Riser Line to suit EZYTRAY
    Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH

    6x Riser Links required to perform a 90 degree set.

    Order fasteners separately for installation (per riser link):
    2x SBH
    2x CNH

  • EMSCZ

    Ezymesh Bottom Joiner

    Call for price EMSCZ

    Bottom Joiner to suit EZYMESH (EMSC)
    Manufactured from 2mm Pressed steel to AS1594.
    The published load results are based on uniformly loaded, simply supported span.
    To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.

  • EMWBZ

    Ezymesh Wall Mount Bracket

    Call for price EMWBZ

    Wall Mount to suit EZYMESH (EMWB)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used on mesh lengths up to 150mm in width. 1 x M8 fastener supplied.

  • N1SH10BH

    N1 Hanging Splice Plate Kit

    Call for price N1SH10BH

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1VSH

    N1 Vertical Splice Plate Kit

    Call for price N1VSH

    NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)

    2x Vertical Splices required per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1VSH

  • CT...

    Perforated Cable Tray

    Select Options CT...

    CT Perforated Cable Tray