109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
CONTACT US 02 4961 4433
Wishlist
CONTACT US 02 4961 4433

41mm x 21mm x 6m Channel/Strut Stainless Steel SS316

Call for price

SKU: E3300S

Channel/Strut 41mm x 21mm x 6000mm Stainless Steel SS316

Download: DATASHEET

EzyStrut E3300S Channel/Strut section is manufactured from strip steel to the following AS standards:

Mild Steel & Hot Dip Galvanised to AS/NZS1365, AS1594, AS/NZS4680, ISO1461
Pre-Galvanised to AS1397
Stainless Steel to AS1449, AS2837

Technical Details
The load values shown are in accordance with AS/NZS4600:1996, using a minimum yield stress for Fy of 210 MPa on plain channel/strut.

The published results are based on a uniformly loaded, simply supported span.

Deflection has been calculated using standard formulae at the maximum permissible stress.

PART#: E3300S Category: Order on:   Pick Up ONLY

Related products

  • 41mm x 21mm x 6m Channel/Strut HDG

     Call for price E3300H

    Channel/Strut 41mm x 21mm x 6000mm HDG

  • 41mm x 41mm x 6m Channel/Strut SLOTTED HDG

     Call for price E1000SH

    Channel/Strut SLOTTED 41mm x 41mm x 6000mm HDG

  • 61mm x 41mm x 6m Channel/Strut HDG

     Call for price E5500H

    Channel/Strut 61mm x 41mm x 6000mm HDG

  • ET RISER LINK

     Select Options ETRL

    Riser Line to suit EZYTRAY
    Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH

    6x Riser Links required to perform a 90 degree set.

    Order fasteners separately for installation (per riser link):
    2x SBH
    2x CNH

  • ET SPLICE PLATE

     Select Options ETS

    Splice Plate to suit EZYTRAY
    Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

    2x Splices per length of tray.

    Order fasteners separately for installation (per splice plate):
    2x SBH
    2x CNH

  • ET TEE BRACKET

     Call for price ETTXH

    Tee/Cross Bracket to suit EZYTRAY
    The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH

    2x TX Brackets required to make a tee, and 4 required to make a cross.
    Order fasteners separately for installation (per TX Bracket):
    4x SBH
    4x CNH

  • Perforated Cable Tray

     Select Options CT...

    CT Perforated Cable Tray

  • Strut Joiner for E1000 HDG

     Call for price E1377H

    184mm long, suits 41x41mm channel.
    EzyStrut mild steel framing components are manufactured from merchant bar to AS/NZS 3679.1 and galvanised to AS/NZS 4680, ISO 1461.
    Most components can also be manufactured in stainless steel from bar to AS1449, AS2837. E1377H