Radius Plate to suit EZYTRAY
Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH
Nominal length 2.0 metres.
Order fasteners separately for installation.
Approximate length required to make a 150 radius bend
Tee/Cross Bracket to suit EZYTRAY
The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH
2x TX Brackets required to make a tee, and 4 required to make a cross.
Order fasteners separately for installation (per TX Bracket):
4x SBH
4x CNH
Bottom Joiner to suit EZYMESH (EMSC)
Manufactured from 2mm Pressed steel to AS1594.
The published load results are based on uniformly loaded, simply supported span.
To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.
NEMA 1 Hanging Splice Plate HDG
2x Splices required per length of cable ladder.
2 x HB0820H required (per splice plate, supplied)
M8 Splice Fixing Holes
EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
Meets Nema 1 Load Rating
N1SHBH
NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)
2x Vertical Splices required per length of cable ladder.
2x HB0820H required (per splice plate, supplied)
EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
Stainless Steel to AS1449, AS1837
N1VSH