No products in the cart.
Category
Beam Clamp HDG (Single)
Stocked in Newcastle, Call to confirm QTYs
Hold Down Bracket to suit EZYTRAY The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH
Splice Plate to suit EZYTRAY Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH
2x Splices per length of tray.
Order fasteners separately for installation (per splice plate): 2x SBH 2x CNH
Tee/Cross Bracket to suit EZYTRAY The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH
2x TX Brackets required to make a tee, and 4 required to make a cross. Order fasteners separately for installation (per TX Bracket): 4x SBH 4x CNH
NEMA 1 Cable Ladder Bend HDG (includes bolts)
NEMA 1 Hanging Splice Plate HDG
2x Splices required per length of cable ladder. 2 x HB0820H required (per splice plate, supplied) M8 Splice Fixing Holes
EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards: Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461 Meets Nema 1 Load Rating N1SHBH
NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)
2x Vertical Splices required per length of cable ladder. 2x HB0820H required (per splice plate, supplied)
EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards: Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461 Stainless Steel to AS1449, AS1837 N1VSH
Purlin Clamp for Rod
