Flat Plate Fitting (4x 14mm Holes) HDG

Related products

• CFCT...
  

  CT & ET Flat Cover

  Select Options

  Flat Cover to suit Perforated (CT) and Ezytray (ET)

• ETHD
  

  ET HOLD DOWN

  Select Options

  Hold Down Bracket to suit EZYTRAY
  The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

• ETS
  

  ET SPLICE PLATE

  Select Options

  Splice Plate to suit EZYTRAY
  Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

  2x Splices per length of tray.

  Order fasteners separately for installation (per splice plate):
  2x SBH
  2x CNH

• EMSCZ
  

  Ezymesh Bottom Joiner

  Call for price

  Bottom Joiner to suit EZYMESH (EMSC)
  Manufactured from 2mm Pressed steel to AS1594.
  The published load results are based on uniformly loaded, simply supported span.
  To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.

• E1062H
  

  Flat Plate Fitting (1x 8mm Hole) HDG

  Call for price

  Flat Plate Fitting (1x 8mm Hole) HDG

• E1065H
  

  Flat Plate Fitting (2x 14mm Holes) HDG

  Call for price

  Flat Plate Fitting (2x 14mm Holes) HDG

• N1ER...
  

  N1 EXTERNAL RISER

  Select Options

  NEMA 1 Cable Ladder External Riser HDG

• N1SH
  

  N1 Splice Plate Kit

  Call for price

  NEMA 1 Cable Ladder Splice Plate KIT HDG (includes bolts)

  2x Splices required per length of cable ladder.
  2 x HB0820H required (per splice plate, supplied)

  EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
  Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
  Stainless Steel to AS1449, AS1837
  N1SH