41mm x 41mm x 6m Channel/Strut HDG
Call for price
SKU: E1000HChannel/Strut 41mm x 41mm x 6000mm HDG
EzyStrut E1000H Channel/Strut section is manufactured from strip steel to the following AS standards:
Mild Steel & Hot Dip Galvanised to AS/NZS1365, AS1594, AS/NZS4680, ISO1461
Pre-Galvanised to AS1397
Stainless Steel to AS1449, AS2837
Technical Details
The load values shown are in accordance with AS/NZS4600:1996, using a minimum yield stress for Fy of 210 MPa on plain channel/strut.
The published results are based on a uniformly loaded, simply supported span.
Deflection has been calculated using standard formulae at the maximum permissible stress.
Related products
-
41mm x 21mm x 6m Channel/Strut Stainless Steel SS316
Call for price E3300SChannel/Strut 41mm x 21mm x 6000mm Stainless Steel SS316
-
41mm x 82.6mm x 6m Channel/Strut DOUBLE SIDED HDG
Call for price E1001HChannel/Strut DOUBLE SIDED 41mm x 82.6mm x 6000mm HDG
-
Cup Head Bolt
Call for price SBHBoth Items are ordered separately.
EzyStrut Splice Bolts have a smooth head to eliminate the risk of sheathing the cable during installation. -
ET HOLD DOWN
Select Options ETHDHold Down Bracket to suit EZYTRAY
The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH -
ET RADIUS PLATES
Select Options ETRPRadius Plate to suit EZYTRAY
Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPHNominal length 2.0 metres.
Order fasteners separately for installation.
Approximate length required to make a 150 radius bend -
-
-
