109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Select Options

CB4 BRACKET

Cantilever Bracket Braced HDG

Download: DATASHEET
SKU: CB4... Category: Tag:   Free into Store over $150
SKU: CB4...

300mm through to 900mm braced cantilever bracket using E1000 41x41mm channel/strut.

EzyStrut Cantilever Brackets are manufactured to complement the range of cable support systems.

Fully galvanised after fabrication to provide heavy duty protection in most conditions.

Can also be manufactured in stainless steel grade 316 for use in extremely corrosive environments.

Fibreglass brackets available upon request.

2x fasteners are required per bracket for assembly.

Part: CB4-150H, CB4-300H, CB4-450H, CB4-600H, CB4-750H, CB4-900H

Length

150mm, 300mm, 450mm, 600mm, 750mm, 900mm
Finish

HDG, Stainless Steel
SKU: CB4... Category: Tag:   Free into Store over $150

Related products

  • ETRP

    ET RADIUS PLATES

    Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • ETS

    ET SPLICE PLATE

    Select Options ETS

    Splice Plate to suit EZYTRAY
    Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

    2x Splices per length of tray.

    Order fasteners separately for installation (per splice plate):
    2x SBH
    2x CNH

  • ETTXH

    ET TEE BRACKET

    Call for price ETTXH

    Tee/Cross Bracket to suit EZYTRAY
    The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH

    2x TX Brackets required to make a tee, and 4 required to make a cross.
    Order fasteners separately for installation (per TX Bracket):
    4x SBH
    4x CNH

  • EMSBZ

    EzyMesh Bolt Joiner

    Call for price EMSBZ

    Bolt Joiner Kit to suit EZYMESH (EMSB)
    The EzyMesh Bolt Joiner Kit is manufactured from pressed steel, and supplied with fastener for assembly.

  • EMWBZ

    Ezymesh Wall Mount Bracket

    Call for price EMWBZ

    Wall Mount to suit EZYMESH (EMWB)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used on mesh lengths up to 150mm in width. 1 x M8 fastener supplied.

  • ET...

    EZYTRAY

    Select Options ET...

    EZYTRAY Cable Tray

  • N1B...

    N1 BEND

    Select Options N1B...

    NEMA 1 Cable Ladder Bend HDG (includes bolts)

  • N1HSH

    N1 Horizontal Splice Plate Kit

    Call for price N1HSH

    NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

    2x Horizontal Splices per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    H1HSH