109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Select Options

CB2 BRACKET

Cantilever Bracket (Un-braced) HDG

Download: DATASHEET
SKU: CB2... Category: Tag:   Free into Store over $150

150mm through to 900mm long cantilever using E1000 41x41mm channel/strut.

EzyStrut Cantilever Brackets are manufactured to complement the range of cable support systems.

Fully galvanised after fabrication to provide heavy duty protection in most conditions.

Can also be manufactured in stainless steel grade 316 for use in extremely corrosive environments.

Fibreglass brackets available upon request.

2x fasteners are required per bracket for assembly.

Part: CB2-150H, CB2-300H, CB2-450H, CB2-600H, CB2-750H, CB2-900H

Length

150mm, 300mm, 450mm, 600mm, 750mm, 900mm
Finish

HDG, Stainless Steel
SKU: CB2... Category: Tag:   Free into Store over $150

Related products

  • ETHD

    ET HOLD DOWN

    Select Options

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • EMSZ

    EzyMesh Side Joiner

    Call for price

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • ET...

    EZYTRAY

    Select Options

    EZYTRAY Cable Tray

  • CFN1...

    N1 COVER

    Select Options

    EzyStrut covers are manufactured from sheet steel to the following AS standards: Pre-Galvanised to AS1397 Hot Dip Galvanised to AS/NZS4680, ISO1461 Stainless Steel to AS1449, AS2837 Aluminium to AS1734 Part: CFN1600H, CFN1300H, CFN1150H, CFN1450H

  • N1ER...

    N1 EXTERNAL RISER

    Select Options

    NEMA 1 Cable Ladder External Riser HDG

  • N1SH10BH

    N1 Hanging Splice Plate Kit

    Call for price

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1HDUH

    N1 Hold Down Kit

    Call for price

    NEMA 1 Cable Ladder Hold Down Unit HDG (includes springnut & bolt)
    Supplied complete with hold down plate, spring nut and screw.
    Hold Down units are supplied with zinc plated fasteners as standard.
    N1HDUH

  • N1VSH

    N1 Vertical Splice Plate Kit

    Call for price

    NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)

    2x Vertical Splices required per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1VSH