109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Call for price

INTERNAL CORNER – 150 x 50

Internal Corner to suit AKS50

Download: DATASHEET
SKU: AKS50IC... Category: Tag:   Free into Store over $150
SKU: AKS50IC...
AKS50-XX 150 50 3000 1x 3m Duct Body + 1x 3m Snap-Fit Lid + 1x Joiner Kit
AKS50OC-XX Outlet Mounting Kit to suit AKS50
AKS50E-XX End Cap to suit AKS50
AKS50EC-XX External Corner to suit AKS50
AKS50IC-XX Internal Corner to suit AKS50
AKS50FP-XX EXTRA – Outlet Front Plate ONLY to suit AKS50
AKS50SO-XX EXTRA – Outlet Mounting Shroud & screws ONLY to suit AKS50
AKS50L-XX EXTRA – 1x 3m Snap-Fit Lid ONLY to suit AKS50
AKS50D-XX EXTRA – 1x 3m Duct Body ONLY to suit AKS50
Colour

Black Ripple, Natural Anodised, Oyster Grey, Pearl White, Rivergum Biege
SKU: AKS50IC... Category: Tag:   Free into Store over $150

Related products

  • ETHD

    ET HOLD DOWN

    Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETRP

    ET RADIUS PLATES

    Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • ETTXH

    ET TEE BRACKET

    Call for price ETTXH

    Tee/Cross Bracket to suit EZYTRAY
    The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH

    2x TX Brackets required to make a tee, and 4 required to make a cross.
    Order fasteners separately for installation (per TX Bracket):
    4x SBH
    4x CNH

  • EMSBZ

    EzyMesh Bolt Joiner

    Call for price EMSBZ

    Bolt Joiner Kit to suit EZYMESH (EMSB)
    The EzyMesh Bolt Joiner Kit is manufactured from pressed steel, and supplied with fastener for assembly.

  • EMSCZ

    Ezymesh Bottom Joiner

    Call for price EMSCZ

    Bottom Joiner to suit EZYMESH (EMSC)
    Manufactured from 2mm Pressed steel to AS1594.
    The published load results are based on uniformly loaded, simply supported span.
    To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.

  • N1HSH

    N1 Horizontal Splice Plate Kit

    Call for price N1HSH

    NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

    2x Horizontal Splices per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    H1HSH

  • N1VSH

    N1 Vertical Splice Plate Kit

    Call for price N1VSH

    NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)

    2x Vertical Splices required per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1VSH

  • AKS50...

    SKIRTING DUCT with SNAPFIT LID – 150 x 50

    Call for price AKS50...

    1x 3m Duct Body + 1x 3m Snap-Fit Lid + 1x Joiner Kit