109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Select Options

CB4 BRACKET

Cantilever Bracket Braced HDG

Download: DATASHEET
SKU: CB4... Category: Tag:   Free into Store over $150
SKU: CB4...

300mm through to 900mm braced cantilever bracket using E1000 41x41mm channel/strut.

EzyStrut Cantilever Brackets are manufactured to complement the range of cable support systems.

Fully galvanised after fabrication to provide heavy duty protection in most conditions.

Can also be manufactured in stainless steel grade 316 for use in extremely corrosive environments.

Fibreglass brackets available upon request.

2x fasteners are required per bracket for assembly.

Part: CB4-150H, CB4-300H, CB4-450H, CB4-600H, CB4-750H, CB4-900H

Length

150mm, 300mm, 450mm, 600mm, 750mm, 900mm
Finish

HDG, Stainless Steel
SKU: CB4... Category: Tag:   Free into Store over $150

Related products

  • CFCT...

    CT & ET Flat Cover

    Select Options CFCT...

    Flat Cover to suit Perforated (CT) and Ezytray (ET)

  • ETHD

    ET HOLD DOWN

    Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETRP

    ET RADIUS PLATES

    Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • EMSCZ

    Ezymesh Bottom Joiner

    Call for price EMSCZ

    Bottom Joiner to suit EZYMESH (EMSC)
    Manufactured from 2mm Pressed steel to AS1594.
    The published load results are based on uniformly loaded, simply supported span.
    To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.

  • EMSZ

    EzyMesh Side Joiner

    Call for price EMSZ

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • N1HDUH

    N1 Hold Down Kit

    Call for price N1HDUH

    NEMA 1 Cable Ladder Hold Down Unit HDG (includes springnut & bolt)
    Supplied complete with hold down plate, spring nut and screw.
    Hold Down units are supplied with zinc plated fasteners as standard.
    N1HDUH

  • N1HSH

    N1 Horizontal Splice Plate Kit

    Call for price N1HSH

    NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

    2x Horizontal Splices per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    H1HSH

  • N1SH

    N1 Splice Plate Kit

    Call for price N1SH

    NEMA 1 Cable Ladder Splice Plate KIT HDG (includes bolts)

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1SH