109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Call for price

Angle Strut Fitting (4x 14mm Holes) HDG

Angle Strut Fitting (4x 14mm Holes) HDG

SKU: E1325H Category: Tag:   Free into Store over $150
SKU: E1325H

Part: E1325H

SKU: E1325H Category: Tag:   Free into Store over $150

Related products

  • E1068H

    Angle Plate Fitting (2x 14mm Holes) HDG

    Call for price E1068H

    Angle Plate Fitting (2x 14mm Holes)

  • SBH

    Cup Head Bolt

    Call for price SBH

    Both Items are ordered separately.
    EzyStrut Splice Bolts have a smooth head to eliminate the risk of sheathing the cable during installation.

  • ETRP

    ET RADIUS PLATES

    Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • ETRL

    ET RISER LINK

    Select Options ETRL

    Riser Line to suit EZYTRAY
    Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH

    6x Riser Links required to perform a 90 degree set.

    Order fasteners separately for installation (per riser link):
    2x SBH
    2x CNH

  • ETTXH

    ET TEE BRACKET

    Call for price ETTXH

    Tee/Cross Bracket to suit EZYTRAY
    The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH

    2x TX Brackets required to make a tee, and 4 required to make a cross.
    Order fasteners separately for installation (per TX Bracket):
    4x SBH
    4x CNH

  • N1B...

    N1 BEND

    Select Options N1B...

    NEMA 1 Cable Ladder Bend HDG (includes bolts)

  • N1SH10BH

    N1 Hanging Splice Plate Kit

    Call for price N1SH10BH

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1VSH

    N1 Vertical Splice Plate Kit

    Call for price N1VSH

    NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)

    2x Vertical Splices required per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1VSH