109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Select Options

ET RISER LINK

Riser Line to suit EZYTRAY
Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH

6x Riser Links required to perform a 90 degree set.

Order fasteners separately for installation (per riser link):
2x SBH
2x CNH

Download: DATASHEET
SKU: ETRL Category: Tag:   Free into Store over $150
SKU: ETRL
Finish

GALVABOND, HDG
SKU: ETRL Category: Tag:   Free into Store over $150

Related products

  • ETRP

    ET RADIUS PLATES

    Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • ETS

    ET SPLICE PLATE

    Select Options ETS

    Splice Plate to suit EZYTRAY
    Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

    2x Splices per length of tray.

    Order fasteners separately for installation (per splice plate):
    2x SBH
    2x CNH

  • EMSCZ

    Ezymesh Bottom Joiner

    Call for price EMSCZ

    Bottom Joiner to suit EZYMESH (EMSC)
    Manufactured from 2mm Pressed steel to AS1594.
    The published load results are based on uniformly loaded, simply supported span.
    To be used in conjunction with Side Joiners for joining straight lengths of cable mesh only.

  • ET...

    EZYTRAY

    Select Options ET...

    EZYTRAY Cable Tray

  • N1B...

    N1 BEND

    Select Options N1B...

    NEMA 1 Cable Ladder Bend HDG (includes bolts)

  • CFN1...

    N1 COVER

    Select Options CFN1...

    EzyStrut covers are manufactured from sheet steel to the following AS standards: Pre-Galvanised to AS1397 Hot Dip Galvanised to AS/NZS4680, ISO1461 Stainless Steel to AS1449, AS2837 Aluminium to AS1734 Part: CFN1600H, CFN1300H, CFN1150H, CFN1450H

  • N1SH10BH

    N1 Hanging Splice Plate Kit

    Call for price N1SH10BH

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1HSH

    N1 Horizontal Splice Plate Kit

    Call for price N1HSH

    NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

    2x Horizontal Splices per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    H1HSH