109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Select Options

ZIPPERTUBE HEATSHRINK

SKU: N/A Category: Tag:   Free into Store over $150
SKU:

RJAN Zippertube Heatshrink, also known as Wraparound Cable Repair Sleeves is available in both 500mm and 1000mm lengths

Zipper Tube Heatshrink Part Numbers:
RMS43-10/500 – 43mm – 10mm Zipper Tube
RMS52-15/500 – 52mm – 15mm Zipper Tube
RMS52-15/1000 – 52mm – 15mm Zipper Tube
RMS76-22/500 – 76mm – 22mm Zipper Tube
RMS76-22/1000 – 76mm – 22mm Zipper Tube
RMS100-30/1000 – 100mm – 30mm Zipper Tube
RMS139-38/1000 – 139mm – 38mm Zipper Tube
RMS185-55/1000 – 185mm – 55mm Zipper Tube

Range

100mm – 30mm, 139mm – 38mm, 185mm – 55mm, 52mm – 15mm, 76mm – 22mm
Length

500mm, 1000mm
SKU: N/A Category: Tag:   Free into Store over $150

Related products

  • ETHD

    ET HOLD DOWN

    Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETRP

    ET RADIUS PLATES

    Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • EMSBZ

    EzyMesh Bolt Joiner

    Call for price EMSBZ

    Bolt Joiner Kit to suit EZYMESH (EMSB)
    The EzyMesh Bolt Joiner Kit is manufactured from pressed steel, and supplied with fastener for assembly.

  • EMSZ

    EzyMesh Side Joiner

    Call for price EMSZ

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • EMWBZ

    Ezymesh Wall Mount Bracket

    Call for price EMWBZ

    Wall Mount to suit EZYMESH (EMWB)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used on mesh lengths up to 150mm in width. 1 x M8 fastener supplied.

  • HSMDW...

    HEATSHRINK – GLUE LINED (4ft)

    Select Option HSMDW...

    Heatshrink Medium Wall Glue Lined (4ft) medium wall heat shrink tubing with a shrink ratio of 4:1 is resistant to solvents, acids and alkaline solutions and offers especially good mechanical strength. The thermoplastic adhesive liner provides good moisture sealing and weathering protection. Suitable for insulation and protection of low voltage cable joints and terminations.

  • N1ER...

    N1 EXTERNAL RISER

    Select Options N1ER...

    NEMA 1 Cable Ladder External Riser HDG

  • N1SH

    N1 Splice Plate Kit

    Call for price N1SH

    NEMA 1 Cable Ladder Splice Plate KIT HDG (includes bolts)

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1SH