No products in the cart.
Category
Pole Bracket to suit PFV100695
PARTS: PFBKT1, PFBKT3
Single Phase, Three Phase
Both Items are ordered separately. EzyStrut Splice Bolts have a smooth head to eliminate the risk of sheathing the cable during installation.
Hold Down Bracket to suit EZYTRAY The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH
Radius Plate to suit EZYTRAY Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH
Nominal length 2.0 metres. Order fasteners separately for installation. Approximate length required to make a 150 radius bend
Tee/Cross Bracket to suit EZYTRAY The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH
2x TX Brackets required to make a tee, and 4 required to make a cross. Order fasteners separately for installation (per TX Bracket): 4x SBH 4x CNH
EMS Side Joiner to suit Ezymesh (EMS) Manufactured from 2mm Pressed steel to AS1594. To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together. The published load results are based on uniformly loaded, simply supported span.
EZYTRAY Cable Tray
Open Eye Bolt 16mm
CT Perforated Cable Tray
