109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
CONTACT US 02 4961 4433
Wishlist
CONTACT US 02 4961 4433

PIERCING CONNECTOR – BARE MAINS

Select...

SKU: NTD...

APPLICATION
Mains: Bare copper or aluminium
Tap: Insulated copper or aluminium

Download: DATASHEET

FEATURES
Provides a fully sealed, waterproof connection on the tap.
No need to strip cable to make the connection
Simultaneous piercing on main & tap
Torque controlling shear heads on all bolts
Tightening bolts do not come into contact with live components
Captive end cap for protection of tap cable, which can be mounted on either side.
Fully bimetallic
Stainless steel fasteners

INSTALLATION NOTES
When using 2 bolt connectors from this range, each bolt must be tightened a 1/4 to 1/2 turn alternately, until the shear head operates.
For tightening the shear head bolts, use only a 13mm AF, six sided hexagon socket (17mm AF for models NTD431XFA and NTD451XFA).
For double insulated cables, the outer sheath should be removed before applying the connector.

PARTS: NTD101AF, NTD301AXFA, NTD301XFAE, NTD351AXFA, NTD351AXFAE, NTD351XFA, NTD401AXFA, NTD401AXFAE, NTD401XFA, NTD431AXFA, NTD451AXFA, NTD451AXFAE

Mains Type

Aluminium, Copper
Mains

06mm – 54mm, 07mm – 54mm, 07mm – 95mm, 50mm – 150mm, 95mm – 240mm
Service

06mm – 35mm, 35mm – 95mm, 50mm – 150mm, 95mm – 150mm
PART#: NTD... Category: Order on:   Free into Store over $150

Related products

  • ET HOLD DOWN

     Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ET RADIUS PLATES

     Select Options ETRP

    Radius Plate to suit EZYTRAY
    Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH

    Nominal length 2.0 metres.
    Order fasteners separately for installation.
    Approximate length required to make a 150 radius bend

  • ET RISER LINK

     Select Options ETRL

    Riser Line to suit EZYTRAY
    Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH

    6x Riser Links required to perform a 90 degree set.

    Order fasteners separately for installation (per riser link):
    2x SBH
    2x CNH

  • EZYTRAY

     Select Options ET...

    EZYTRAY Cable Tray

  • OPEN EYE BOLT – 350mm x 16mm

     Call for price OEB16X350

    Open Eye Bolt 350mm x 16mm

  • Q HOOK

     Call for price QHOOK

    QHOOK Galvanised M12

  • SERVICE FUSE HOLDER – BRACKET 3 PHASE (HOUSE)

     Call for price HFBKT3

    Three Phase House Bracket to suit PFV100695

  • SERVICE FUSE HOLDER – BRACKET 3 PHASE (POLE)

     Call for price PFBKT3

    Three Phase Pole Bracket to suit PFV100695