HEX NUTS
Select Options
SKU: HN...Part: HN12H, HN10H, HN08H, HN06H, HN12Z, HN10Z, HN08Z, HN06S, HN12S
Thread | 06mm, 08mm, 10mm, 12mm |
---|---|
Finish | HDG, Stainless Steel, ZINC |
Select Options
SKU: HN...Part: HN12H, HN10H, HN08H, HN06H, HN12Z, HN10Z, HN08Z, HN06S, HN12S
Thread | 06mm, 08mm, 10mm, 12mm |
---|---|
Finish | HDG, Stainless Steel, ZINC |
Hold Down Bracket to suit EZYTRAY
The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH
Radius Plate to suit EZYTRAY
Use the radius plate to create a bend in your length of EzyTray cable tray. A video demonstration on how to create bends in cable tray is available in our Media Centre. ETRPG ETRPH
Nominal length 2.0 metres.
Order fasteners separately for installation.
Approximate length required to make a 150 radius bend
Riser Line to suit EZYTRAY
Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH
6x Riser Links required to perform a 90 degree set.
Order fasteners separately for installation (per riser link):
2x SBH
2x CNH
Bolt Joiner Kit to suit EZYMESH (EMSB)
The EzyMesh Bolt Joiner Kit is manufactured from pressed steel, and supplied with fastener for assembly.
EMS Side Joiner to suit Ezymesh (EMS)
Manufactured from 2mm Pressed steel to AS1594.
To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
The published load results are based on uniformly loaded, simply supported span.