109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
CONTACT US 02 4961 4433
Wishlist
CONTACT US 02 4961 4433

GREEN TURRETS (KIT)

Select Options

SKU: TURRET_XX_BOLTS

Green Electrical Turret/Pillar Box Kits

TURRET_SH_ALLEN – Short Turret Green c/w Allen Bolts ( 1 x UEC11MG / UT11SG / UESM10/4 )
TURRET_SH_DBOLT – Short Turret Green c/w D Bolts ( 1 x UEC11MG / UT11SG / DHB10MW22/4 )
TURRET_TL_ALLEN – Turret Tall Green c/w Allen Bolts ( 1 x UEC11MG / UT11G / UESM10/4 )
TURRET_TL_DBOLT – Turret Tall Green c/w D Bolts ( 1 x UEC11MG / UT11G / DHB10MW22/4 )

size

Short Lid, Tall Lid
Bolt Type

Allen Bolts, D Bolts
PART#: TURRET_XX_BOLTS Category: Order on:   +Freight Charge

Related products

  • ET HOLD DOWN

     Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ET RISER LINK

     Select Options ETRL

    Riser Line to suit EZYTRAY
    Riser Links are used to create a riser or vertical bend in a length of EzyTray. ETRLG, ETRLH

    6x Riser Links required to perform a 90 degree set.

    Order fasteners separately for installation (per riser link):
    2x SBH
    2x CNH

  • ET TEE BRACKET

     Call for price ETTXH

    Tee/Cross Bracket to suit EZYTRAY
    The TX Tee/Cross bracket is used to create tee or cross style joins between lengths of EzyTray. ETTXH

    2x TX Brackets required to make a tee, and 4 required to make a cross.
    Order fasteners separately for installation (per TX Bracket):
    4x SBH
    4x CNH

  • EzyMesh Side Joiner

     Call for price EMSZ

    EMS Side Joiner to suit Ezymesh (EMS)
    Manufactured from 2mm Pressed steel to AS1594.
    To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.
    The published load results are based on uniformly loaded, simply supported span.

  • N1 Cover Clamp

     Call for price N1CCH

    NEMA 1 Cable Ladder Cover Clamp HDG (includes bolt)
    Supplied complete with cone screw for installation.
    Suitable for use on both cable ladders and fittings.
    N1CCH

  • N1 Hanging Splice Plate Kit

     Call for price N1SH10BH

    NEMA 1 Hanging Splice Plate HDG

    2x Splices required per length of cable ladder.
    2 x HB0820H required (per splice plate, supplied)
    M8 Splice Fixing Holes

    EzyStrut Cable Ladder Hanging Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Meets Nema 1 Load Rating
    N1SHBH

  • N1 INTERNAL RISER

     Select Options N1IR...

    NEMA 1 Cable Ladder Internal Riser HDG

  • N1 Vertical Splice Plate Kit

     Call for price N1VSH

    NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)

    2x Vertical Splices required per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1VSH