109 Broadmeadow Road, Broadmeadow, NSW, 2292
Open: Mon-Fri from 7.00am to 4.30pm
0$0.00

No products in the cart.

Category

Call Us 02 4961 4433

Category

Select Options

HEX NUTS

SKU: HN... Category: Tag:   Free into Store over $150
SKU: HN...

Part: HN12H, HN10H, HN08H, HN06H, HN12Z, HN10Z, HN08Z, HN06S, HN12S

Thread

06mm, 08mm, 10mm, 12mm
Finish

HDG, Stainless Steel, ZINC
SKU: HN... Category: Tag:   Free into Store over $150

Related products

  • SBH

    Cup Head Bolt

    Call for price SBH

    Both Items are ordered separately.
    EzyStrut Splice Bolts have a smooth head to eliminate the risk of sheathing the cable during installation.

  • ETHD

    ET HOLD DOWN

    Select Options ETHD

    Hold Down Bracket to suit EZYTRAY
    The Hold Down Unit is used to secure the EzyTray cable tray to a length of strut/channel. Always use in pairs on opposite sides of the tray, and secure an EzyTray at least twice along its length. ETHDG ETHDH

  • ETS

    ET SPLICE PLATE

    Select Options ETS

    Splice Plate to suit EZYTRAY
    Splice Plates are used to join 2 lengths of tray together, and are installed on the inside of the trays’ side wall. ETSG, ETSH

    2x Splices per length of tray.

    Order fasteners separately for installation (per splice plate):
    2x SBH
    2x CNH

  • EMSBZ

    EzyMesh Bolt Joiner

    Call for price EMSBZ

    Bolt Joiner Kit to suit EZYMESH (EMSB)
    The EzyMesh Bolt Joiner Kit is manufactured from pressed steel, and supplied with fastener for assembly.

  • HB...

    HEX BOLTS

    Select Options HB...

    Hex Head Bolt

  • N1HSH

    N1 Horizontal Splice Plate Kit

    Call for price N1HSH

    NEMA 1 Cable Ladder Horizontal Splice HDG (includes bolts)

    2x Horizontal Splices per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild Steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    H1HSH

  • N1VSH

    N1 Vertical Splice Plate Kit

    Call for price N1VSH

    NEMA 1 Cable Ladder Vertical Splice HDG (includes bolts)

    2x Vertical Splices required per length of cable ladder.
    2x HB0820H required (per splice plate, supplied)

    EzyStrut Cable Ladder Splices are manufactured from sheet steel to the following AS standards:
    Mild steel to AS/NZS1365 and Hot Dip Galvanised to AS/NZS4680, ISO1461
    Stainless Steel to AS1449, AS1837
    N1VSH

  • WS...

    SPRING WASHERS

    Select Options WS...

    Spring Washers